CJC-1295 No DAC 10mg Certificate of Analysis (COA), Lot by Lot

CJC-1295 No DAC 10mg: every lot, every certificate

Each released lot for this compound and the third-party certificate issued for it. Lots that did not pass are never released and never appear here.

Lot	Received	Purity	Identity	Certificate
9001_260904_CJCND_1	Sep 4, 2026	99.7% RP-HPLC	C JC-1295 w/o ,AC L C-MS P OTENCY 9 .87 m g H PLC	Lot page · PDF

What this certificate shows

A CJC-1295 No DAC 10mg certificate of analysis from ANKR Lab reports two things about one specific lot. Purity is measured by RP-HPLC: the sample is separated by chromatography and the share attributed to the target compound is reported as a percentage. Identity is confirmed by LC-MS, which compares the measured mass of the sample against the expected mass for CJC-1295 No DAC 10mg. The certificate also carries the lot number, the date the lot was received, and a lab accession code.

Testing is performed by Optiq Health Labs, independent of ANKR Lab. The accession code printed on each certificate can be checked with the lab directly, so the document is verifiable outside this website.

What a CJC-1295 No DAC 10mg certificate specifically shows

CJC-1295 without DAC, also called Mod GRF 1-29, is the shorter of the two CJC-1295 compounds ANKR Lab certifies. The DAC version carries a drug affinity complex conjugation that adds substantial mass; this one does not.

The practical consequence for reading this certificate is that the expected mass differs materially between the two, so the LC-MS identity line is the fastest way to confirm the lot is the no-DAC version. Purity by HPLC will look similar for either; identity is what distinguishes them.

How to read a CJC-1295 No DAC 10mg COA

Find the lot number on the vial label. Every ANKR vial carries one. Locate it in the table above.
Open that lot's certificate. The batch ID on the certificate should match the lot on the label.
Read the purity line. The RP-HPLC result is the percentage of the sample identified as CJC-1295 No DAC 10mg.
Check identity. The LC-MS result confirms the measured mass matches the expected mass.
Verify with the lab if you want to. Use the accession code on the certificate with Optiq Health Labs.

A longer walkthrough, with a sample certificate marked up line by line, is in How to read a peptide certificate of analysis.

Questions about CJC-1295 No DAC 10mg certificates

Is every CJC-1295 No DAC 10mg lot tested before it is released?

Yes. Each CJC-1295 No DAC 10mg lot ANKR Lab releases is sent to an independent laboratory for purity (RP-HPLC) and identity (LC-MS) testing, and only lots with a passing certificate are released. This page lists every released lot with its certificate. Laboratory research use only.

Who performs the testing?

Testing is performed by Optiq Health Labs, a third-party laboratory independent of ANKR Lab. Each certificate carries an accession code that can be checked with the lab directly.

How do I match my vial to its certificate?

Every ANKR vial label carries a lot number. Find that lot number in the table on this page, open the lot page or the PDF, and confirm the batch ID on the certificate matches the label.

What does the purity figure on a CJC-1295 No DAC 10mg certificate mean?

Purity is the percentage of the sample that the RP-HPLC analysis attributes to the target compound. Identity is confirmed separately by LC-MS, which checks the measured mass against the expected mass for CJC-1295 No DAC 10mg. These are analytical results for laboratory research use only, not statements about use.

CJC-1295 No DAC 10mg product page · All certificates · Full COA library · How we test

All products are for laboratory research use only. Not for human or veterinary use. Analytical results describe a specific lot and are not statements about any use.