KPV 10mg
Every KPV 10mg lot ANKR Lab has released, with the independent lab report for each one. Match the lot number on the vial label to the table below. Laboratory research use only.
Each released lot for this compound and the third-party certificate issued for it. Lots that did not pass are never released and never appear here.
| Lot | Received | Purity | Identity | Certificate |
|---|---|---|---|---|
| 9001_260904_KPV10M_1 | Sep 4, 2026 | 99.2% RP-HPLC | K LV L C-MS P OTENCY 9 .36 m g H PLC | Lot page · PDF |
A KPV 10mg certificate of analysis from ANKR Lab reports two things about one specific lot. Purity is measured by RP-HPLC: the sample is separated by chromatography and the share attributed to the target compound is reported as a percentage. Identity is confirmed by LC-MS, which compares the measured mass of the sample against the expected mass for KPV 10mg. The certificate also carries the lot number, the date the lot was received, and a lab accession code.
Testing is performed by Optiq Health Labs, independent of ANKR Lab. The accession code printed on each certificate can be checked with the lab directly, so the document is verifiable outside this website.
KPV is a tripeptide, three residues, and about as simple as peptide synthesis gets. Purity figures for a compound this short should be high, and a certificate showing anything materially below the specification is a signal worth taking seriously rather than rounding off.
The short chain also means the expected mass is low and unambiguous, so LC-MS identity confirmation is essentially binary. There is very little room for a KPV certificate to be ambiguous, which makes it a good one to use as a reference point when learning to read these documents.
A longer walkthrough, with a sample certificate marked up line by line, is in How to read a peptide certificate of analysis.
Yes. Each KPV 10mg lot ANKR Lab releases is sent to an independent laboratory for purity (RP-HPLC) and identity (LC-MS) testing, and only lots with a passing certificate are released. This page lists every released lot with its certificate. Laboratory research use only.
Testing is performed by Optiq Health Labs, a third-party laboratory independent of ANKR Lab. Each certificate carries an accession code that can be checked with the lab directly.
Every ANKR vial label carries a lot number. Find that lot number in the table on this page, open the lot page or the PDF, and confirm the batch ID on the certificate matches the label.
Purity is the percentage of the sample that the RP-HPLC analysis attributes to the target compound. Identity is confirmed separately by LC-MS, which checks the measured mass against the expected mass for KPV 10mg. These are analytical results for laboratory research use only, not statements about use.
KPV 10mg product page · All certificates · Full COA library · How we test
All products are for laboratory research use only. Not for human or veterinary use. Analytical results describe a specific lot and are not statements about any use.